Eagle 415 FC Flux Cored Aluminum Repair Rod | Oxy-Acetylene Torch Alloy

Eagle 415 FC is recommended for:

Aluminum tanks
Engine blocks
Cast aluminum repair
General aluminum fabrication
Aluminum housings
Maintenance and repair work
Field repairs
Oxy-acetylene aluminum repair

Designed for repairing and fabricating aluminum, including cast aluminum.

Use a slightly carburizing flame.

Clean all oxides from the weld area using a stainless steel wire brush.

Preheat the material to approximately 1000°F.

Melt approximately 1/4" of the rod onto the workpiece. As the rod heats, the internal flux will liquefy. Continue heating until the alloy begins to flow freely, then add additional alloy until the repair is complete.

Allow the weld to cool slowly. Remove remaining flux with a stiff brush and hot water.

Eagle 415 FC is a flux-cored aluminum torch alloy with active flux contained inside the rod.

It can be applied in all positions using an oxy-acetylene torch, making it a versatile choice for aluminum repair and fabrication.

Why Eagle 415 FC?

Flux inside the rod — no separate external flux application is required.

Excellent for cast aluminum repair — well suited for engine blocks, housings and other cast components.

All-position capability — useful for repairs where the component cannot be positioned flat.

Good colour match and corrosion resistance — helps produce clean, durable aluminum repairs.

415 FC or 414 Super?

Choose Eagle 415 FC when you want to repair aluminum using an oxy-acetylene torch and prefer the convenience of flux built directly into the rod.

Choose Eagle 414 Super when you want to weld aluminum using a stick welding power source.

In simple terms:
415 FC = aluminum torch repair
414 Super = aluminum stick welding

Flame: Slightly Carburizing
Diameter: 1/8" / 3.25 mm