Free flowing economical flux coated alloy for joining brass, copper, stainless steel and alloy steel. This alloy has a broad melting range, which is helpful where clearances are not uniform.
Clean the oxides off the parent metal. Use a slightly carburizing flame and pre-heat to 350℉ (200℃) and then heat the joint area to 800℉ (420℃). Melt a small amount of flux off the end of the rod and allow it to flow throughout the weld area. Then add the EAGLE 300 FC alloy. Allow work piece to cool before removing the flux residue.
The EAGLE 300 FC is an economical free flowing flux coated flexible silver solder for general repair work.
Tensile Strength: Approx. 68,000 psi
Yield Strength: Approx. 54,000 psi
Elongation: Approx. 25%
Working Temp: 1295°F / 700°C
Melting Range: 1125°F / 605° C
Slightly Carburizing Flame
Sizes: Inches 1/16, 3/32
mm 1.60, 2.50
